Install MariaDB 10.6 on Fedora Linux 35

MariaDB is one of the most popular open-source databases next to its originator MySQL. The original creators of MySQL developed MariaDB in response to fears that MySQL would suddenly become a paid service due to Oracle acquiring it in 2010. With its history of doing similar tactics, the developers behind MariaDB have promised to keep it open source and free from such fears as what has happened to MySQL.

MariaDB has become just as popular as MySQL with developers, with advanced clustering with Galera Cluster 4, faster cache/indexes, storage engines, and features/extensions that you won’t find in MySQL.

In the following tutorial, you will learn how to install MariaDB 10.6 on Fedora 35 Workstation or Server.

Prerequisites

  • Recommended OS: Fedora Linux 35.
  • User account: A user account with sudo or root access.

Update Operating System

Update your Fedora operating system to make sure all existing packages are up to date:

sudo dnf upgrade --refresh -y

The tutorial will be using the sudo command and assuming you have sudo status.

To verify sudo status on your account:

sudo whoami

Example output showing sudo status:

[joshua@fedora ~]$ sudo whoami
root

To set up an existing or new sudo account, visit our tutorial on Adding a User to Sudoers on Fedora.

To use the root account, use the following command with the root password to log in.

su

Install MariaDB 10.6 on Fedora

By default, MariaDB 10.6 is featured in Fedora 35’s repository. However, you need to enable it. To do this, first print out what versions of MariaDB are available.

dnf module list mariadb

Example output:

How to Install MariaDB 10.6 on Fedora 35

As above, the default repository is 10.5. However, 10.6 and 10.7 are available. To enable version 10.6 MariaDB series, use the following command.

sudo dnf module enable mariadb:10.6

Example output:

How to Install MariaDB 10.6 on Fedora 35

Type Y and press the ENTER KEY to proceed and enable the change of module streams.

Next, proceed to install MariaDB in your terminal by executing the following.

sudo dnf install mariadb mariadb-server

Example output:

How to Install MariaDB 10.6 on Fedora 35

Type Y and press the ENTER KEY to proceed and complete the installation.

Confirm the installation of MariaDB by checking the version and build:

mariadb --version

Example output:

mariadb  Ver 15.1 Distrib 10.6.5-MariaDB, for Linux (x86_64) using  EditLine wrapper

Check MariaDB 10.6 Service Status

By default, MariaDB is installed and not activated to enable MariaDB to use the following command.

sudo systemctl enable mariadb --now

Now you have installed MariaDB, and you can verify the status of the database software by using the following systemctl command:

systemctl status mariadb

Example:

How to Install MariaDB 10.6 on Fedora 35

By default, you will find MariaDB status to be activated. If not, start MariaDB, use the following command:

sudo systemctl start mariadb

To stop MariaDB:

sudo systemctl stop mariadb

To enable MariaDB on system startup:

sudo systemctl enable mariadb

To disable MariaDB on system startup:

sudo systemctl disable mariadb

To restart the MariaDB service:

sudo systemctl restart mariadb

Secure MariaDB 10.6 with Security Script

When installing MariaDB fresh, default settings are considered weak by most standards and cause concern for potentially allowing intrusion or exploiting hackers. A solution is to run the installation security script with the MariaDB installation.

First, use the following command to launch the (mysql_secure_installation):

sudo mariadb-secure-installation

Next, follow below:

  • Setting the password for root accounts.
  • Removing root accounts that are accessible from outside the local host.
  • Removing anonymous-user accounts.
  • Removing the test database, which by default can be accessed by anonymous users.

Note, you use (Y) to remove everything.

Example:

[joshua@fedora ~]$ sudo mariadb-secure-installation

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
haven't set the root password yet, you should just press enter here.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Setting the root password or using the unix_socket ensures that nobody
can log into the MariaDB root user without the proper authorisation.

You already have your root account protected, so you can safely answer 'n'.

Switch to unix_socket authentication [Y/n] Y <---- Type Y then press the ENTER KEY.
Enabled successfully!
Reloading privilege tables..
 ... Success!


You already have your root account protected, so you can safely answer 'n'.

Change the root password? [Y/n] Y <---- Type Y then press the ENTER KEY.
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] Y <---- Type Y then press the ENTER KEY.
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] Y <---- Type Y then press the ENTER KEY.
 ... Success!

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] Y <---- Type Y then press the ENTER KEY.
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] Y <---- Type Y then press the ENTER KEY.
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

Login to MariaDB 10.6 Terminal Instance

Now that you have completed the post-installation installation security script, login into your MariaDB database can be done using the following:

sudo mysql -u root -p

You will be prompted to enter the root password that you set in either the installation setup or post-installation security script. Once inside the MariaDB service instance, you can execute the following command as a test to see it in operation.

Type the following SHOW DATABASE command:

SHOW DATABASES;

For those new to MySQL/MariaDB, all commands syntax must end with ;

Example:

How to Install MariaDB 10.6 on Fedora 35

TO (CREATE) a database, use the following command.

CREATE DATABASE MYDATA;

To delete (DROP) a database, use the following command.

DROP DATABASE MYDATA;

To exit the terminal, type the following  exit command :

EXIT;

How to Remove (Uninstall) MariaDB 10.6

If you no longer wish to use MariaDB and want to remove it in full, execute the following command:

sudo dnf autoremove mariadb mariadb-server

Note that this command will remove most of the unused dependencies in the MariaDB installation to help clean up your system.

In your terminal, use the following command.

sudo dnf module reset mariadb -y

This will roll back to the default selection of MariaDB on Fedora 35. Install this version, or to choose another, you will use what you did for MariaDB 10.7, but using a different version option.

Example MariaDB 10.5:

sudo dnf module enable mariadb:10.5 -y

Comments and Conclusion

In the tutorial, you have learned how to install the latest MariaDB 10.6 release Fedora 35.

Overall, it is pretty safe for most users who do not operate in strict production environments to upgrade from the old stable MariaDB 10.5 to the current stable branch 10.6. There are considerable advantages in performance with upgrading. If you do upgrade, always back up your database before doing so to avoid countless hours of pain and utter frustration in anything to do with database maintenance or upgrades.



Follow LinuxCapable.com!

Like to get automatic updates? Follow us on one of our social media accounts!